narrowband power amplifier RNP19040-50 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 1 / 5 version 1.0 product features applications ? gan on sic narrowband high power amplifier ? 1800 ~ 1900mhz operation bandwidth ? 50w typical p3db ? 50% typical power efficiency at p3db ? p3db 3w power ? gan on sic chip on board ? general purpose description the power amplifier module is designed for general purpose. operating frequency range is from 1800 ~ 1900 mhz. gallium nitride on sic technology is used and attached on an aluminum sub carrier. full in/out matching is already applied. improved thermal handling by patented technology. electrical specifications @ tcc=28 ; t=25 ; z s =z l =50 ? parameter unit min typ max condition bandwidth mhz 1800 - 1900 - power gain db 31 33 - @ pin=14dbm gain flatness dbpp - 1 1.5 @ pin=14dbm gain variation vs temperature db - 1 2 -20c to 60c, @ pin=14dbm output power dbm 46 46.5 - @ pin=14dbm power added efficiency % 45 50 - @ pin=14dbm output power dbm 47 47.5 - @ p3db power added efficiency % 50 55 - @ p3db input return loss db - -10 -6 @pin=10dbm supply voltage v 27.5 28 30 vcc(=vds) quiescent current consumption a - 0.5 0.6 - on/off switching time us - 2 5 on : ttl "low" on : ttl "low" shut down or switch on/off ttl voltage v 0 - 0.5 on : ttl "low" 2.5 5 5.5 on : ttl "low" package type : dp-75
narrowband power amplifier RNP19040-50 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 2 / 5 version 1.0 absolute maximum ratings parameter unit rating operating flange temperature c 85 input rf power dbm 18 supply voltage v 30 load mismatch value - 3 : 1 @all load phase environmental characteristics * input signal condition : cw 1-tone parameter unit min typ max symbol operating temperature c -20 - 60 tc storage temperature c -40 - 105 tstg shock & vibration mil-std-810g method 514.6 annex c vi typical performance @ 25c test condition : fixed input power=14dbm test condition : p3db frequency pout ids @pout power gain @pout drain efficiency @pout p3db ids[a] @ psat drain efficiency @p3db mhz dbm a db % dbm a % 1.8 46.03 3.18 31.71 45.04 48.37 4.16 58.93 1.8 46.58 3.35 32.39 48.47 48.36 4.10 59.71 1.82 47.00 3.47 32.89 51.56 48.32 4.02 60.26 1.83 47.66 3.67 33.59 56.71 48.32 3.95 61.40 1.84 48.07 3.83 34.04 59.83 48.22 3.84 61.71 1.85 48.13 3.79 34.15 61.23 48.19 3.75 62.88 1.86 48.09 3.74 34.16 61.57 48.24 3.70 64.30 1.87 47.87 3.62 33.96 60.43 48.15 3.63 64.31 1.88 47.41 3.41 33.49 57.60 48.08 3.54 64.73 1.89 47.18 3.30 33.30 56.55 48.04 3.50 64.99 1.9 46.98 3.20 33.21 55.72 48.07 3.46 66.21
narrowband power amplifier RNP19040-50 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 3 / 5 version 1.0 output power @ pin=14dbm & ids vs. frequency 45.0 45.5 46.0 46.5 47.0 47.5 48.0 48.5 49.0 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.90 frequency[ghz] pout[d bm] . 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 ids[a] . pout ids p3db & ids vs. frequency 45.0 45.5 46.0 46.5 47.0 47.5 48.0 48.5 49.0 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.90 frequency[ghz] psat[dbm] . 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 ids[a] . p3db ids output power @ pin=14dbm & pae vs. frequency 45.0 45.5 46.0 46.5 47.0 47.5 48.0 48.5 49.0 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.90 frequency[ghz] pout[dbm] . 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 pae[%] . pout pae p3db & pae vs. frequency 45.0 45.5 46.0 46.5 47.0 47.5 48.0 48.5 49.0 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.90 frequency[ghz] psat[dbm] . 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 pae[%] . p3db pae power gain @ pin=14dbm vs. frequency 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.90 frequency[ghz] gp[db] . gp power gain @ p3db vs. frequency 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.90 frequency[ghz] gp[db] . gp precautions 1. this product is designed to be used for narrowband amplification. heat generation is higher when there is no rf signal in the de vice. therefore, the worst case scenario is when there is no rf signal, and the amplifier is ?on? with current dr aw. the temperature must be calculated properly. case temperature must maintain below 85c. 2. thermal grease or metal thermal interface materials are recommended for heat dissipation. an example would be spreading thermal grease on the bottom of the device.
narrowband power amplifier RNP19040-50 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 4 / 5 version 1.0 package dimensions (type : dp-75) * unit: mm[inch] | tolerance 0.2[.008] pin description pin no function pin no function 1 rf in 4 switch on/off 2 vcc(+28v) 5 gnd 3 shut down(+5v) 6 rf out how to connected the package to a target pcb with pin without pin * mounting configuration notes 1. ground / thermal via holes are critical for the proper performance of this device. 2. add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. mounting screws can be added near the part to fasten the board to a heatsink. ensure that the ground / thermal via hole regi on contacts the heatsink. 4. do not put solder mask on the backside of the pcb in the region where the board contacts the heatsink. 5. rf trace width depends upon the pcb material and construction. 6. use 1 oz. copper minimum.
narrowband power amplifier RNP19040-50 k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 5 / 5 version 1.0 revision history part number release date version modification data sheet status RNP19040-50 2012.9.28 1.0 - - rfhic corporation reserves the right to make changes to any prod ucts herein or to discontinue any product at any time without n otice. while product specifications have been thoroughly examined for reliability, rfhic corporation strongly recommends buy ers to verify that the information they are using is accurat e before ordering. rfhic corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including wi thout limitation consequential or incidental damages. rfhic products are not intended for use in life support equipment or application where malfunction of the product can be expect ed to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall i ndemnify, protect and hold rfhic corporat ion and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. sales, inquiries and support should be directed to the local au thorized geographic distributor for rfhic corporation. for custo mers in the us, please contact the us sales team at 919- 677-8780. for all other inquiries, please contact the international sales team at 82-31-250-5078.
|
